2008 Symposium Presentations

Makeba A. Anderson, Central State University
A Radio Based Tracking System for High Altitude Ballooning

Christian D. Austin, The Ohio State University
Sparse Synthetic Aperture Radar Image Formation and Parameter Estimation

Caleb J. Barnes,Wright State University
Loitering High Altitude Balloon

Christopher J. Benze, Cleveland State University
New and Improved Lunar Rovers

Joseph F. Betten, Central State University
The Metallographic Investigation of a Deposited Ti 6Al-4V After Friction Stirring

Richard F. Bozak, Jr., Cleveland State University
Strain Sensing with a Piezoelectric Biopolymer

Kyle B. Brady, Case Western Reserve University
Ignition Propensity of Hydrogen in the Presence of Metal Surfaces

Micheal Eric Burba, Central State University
Authenticating Standards of Grain Size Measurement

Kenya P. Carrington, Wilberforce University
Design Analyis of the Active Bandpass Filter

Michael W. Casto, Marietta College
The Rose Run Exploration Trend of Eastern Ohio

Laura E. Childerson, Ohio Northern University
Lift and Drag Coefficients of Wing Designs for an RC Aircraft

Mathew A. Cosgrove, Miami University
Indoor Navigation Using the Particle Filter

Jeffrey V. Coulter, Central State University
The Development of a Flexible Manufacturing System

Mitul R. Dadhania, University of Cincinnati
Impedance Spectroscopy for Biosensors and Hydraulic Hose Failure Detection

Rhonda S. DePuy, Owens Community College
Application of Space Travel Muscle Wasting Research to Aging and Health Compromised Populations

Tammy M Donnadio,. Youngstown State University
Autologous Mesenchymal Stem Cell Transplantation to Improve Fascial Repair

Osama Elbuluk, The University of Akron
Integration of Bi-Camera Imaging System on Smart Balloon

Amy N. Friedlein, Ohio Northern University
Everlasting Energy

Jeremy N. Fuhr, Wright State University
Micro Air Vehicle Project: Development of Quad-Winged Flapping Mechanisms

Kathryn N. Gabet, Case Western Reserve University
Review of Water Management in PEM Fuel Cell Models

Marshall C. Galbraith, University of Cincinnati
Implicit Large Eddy Simulation of Low Reynolds Number Flow Past the SD7003 Airfoil

Joshua D. Garling, Cedarville University
3-D Modeling Tool for New Classical Model of Elementary Particles

Megan E. Genuske, Youngstown State University
Autologous Mesenchymal Stem Cell Transplantation to Improve Fasical Repair

Amy J. Greenfield, Cedarville University
An Investigation of Reaction Rates Using "The Antacid Tablet Race"

Jonathan J. Guernsey, The University of Toledo
A Virtual Dynamic Modularized Network Architecture

Kevin T. Gulley, Cedarville University
A Polycation Receptor in Paramecium and Tetrahymena

Ericka M. Harris, The University of Akron
Shuttle Copter

Beth L. Hegarty, Cedarville University
Proportions in Our Galaxy

Douglas J. Hoersten, Ohio Northern University
Analysis of Drag on a Model Rocket

Dana L. Hollis, Cleveland State University
Solar System Unit Plan

D'Nita M. Howard, Wilberforce University
Design of High-pass Filter to Improve the Quality of Sound and Desired Frequency

Royshawnn Q. Hunt, Wilberforce University
The Infrastructure and Security Advantages of Biometric Technology

Frederick K. Hussein, Cleveland State University
Freeze-Thaw Durability and Nondestructive Testing (NDT) of Pervious Concrete (PC)

Nicole E. Jones, Cleveland State University
Controlling an Induction Machine Using dSPACE

Jonathan F. Juhl, Cedarville University
Atmospheric Electricity: Paving the Way for Meeting Tomorrow's Energy Needs

Lauren J. Keller, Cedarville University
Mathematics of the Moonv

Crystal M. Kerr, Cleveland State University
Space Shuttle Glider Takes Mathematics on a Ride

Robert D. Knapke, University of Cincinnati
Counter-Rotating Aspirated Compressor Time Accurate Simulations

Melissa B. Lewis, Cedarville University
Finding the Height of an Aurora

Michael G. List, University of Cincinnati
High Fidelity Simulation of an Embedded Transonic Fan Stage with Characterization of Flow Physics

Jennifer M. Lukens, University of Dayton
Wing Mechanization Design and Analysis of a Perching Micro Air Vehicle

Ryan M. Marquette, Lorain County Community College
Will Lorain County Community College Benefit from a Photovoltaic System?

Michele S. Mayer, Cedarville University
Ecosystems on Mars

Stephen P. Meador, Miami University
Transient Performance of a Pneumatic Engine

Eric J. Miller, University of Cincinnati
Infrared Led Tracking System

Robert W. Mitchell, University of Dayton
UCAV Wind Tunnel Test Video Inertial Force Measurement

Wai Moe, The University of Akron
Feasibility Study Report: Analytical Prediction and Mechanical Design of a High-Altitude Intelligent Balloon

Maisha M. Murry, University of Cincinnati
Determination of the In Vitro Dissolution Rates of Respirable Airborne Particles of JSC-1A Lunar Mare Regolith Simulant in Simulated Lund Fluid

Marcy E. Namestnik, Cleveland State University
Weather - Making a Cloud

David N. Neff, Wright State University
Integrated Bipolar Plate-Gas Diffusion Electrodes for PEM Fuel Cells

Sarah A. Niedermayer, Cedarville University
Measuring Models and Materials of Planets

Garrett J. Noble, Cedarville University
Monotonic Shear Testing of Hydrocyphenyl Hydrogels

Katie M. O'Brien, Owens Community College
Preventing Bone Resorption in Space Flight

Heather A. Oravec, Case Western Reserve University
The Development of a Soil for Lunar Surface Mobility Testing in Ambient Conditions

Mike Orra, The University of Toledo
Study on the Optimal Compensation for an On-Board Processing Satellite Payload Experiencing Critical Channel Impairment

Hallee M. Palmer, Cedarville University
Accelerometers

Azm Parvez, The University of Akron
Electrospinning of Polymer Nano Fibers

Monica A. Porché, Central State University
Analysis of Extrema Values of a Scalable Parallel Algorithm for Simulating the Control of Steady State Heat Flow through a Metal Sheet

Ryan D. Prater, The University of Akron
Reengineering of Drill Collar Transportation and Storage

Richard E. Reid III, Wright State University
Exploring Software-Defined Radio

Michael J, Reinbolt, Jr., University of Toledo
Computational Fluid Dynamics Simulation Study

Charles R. Reynolds, Marietta College
Computerized Modeling of a Heterogeneous Reservoir

Vincent A. Richardson, Wilberforce University
HF Radio Data Communications and Resonator Tuning

Matthew D. Rippl, Wright State University
Demonstration of an Independent Streamerlike Atmospheric Plasma Jet

Alexander L. Rivera, Case Western Reserve University
Endothelialization and Function in Bifurcating Microfluidic Channels

Thomas R. Robbins, University of Dayton
Quasi-One-Dimensional Materials for Thermoelectric Energy Generation Applications

Ehsan Sadeghipour, The Ohio State University
Design and Analysis of a Variable Compliance Robotic Transmission Using a Magneto-Rheological Fluid Damper

Joseph J. Scavuzzo, The University of Akron
Natural Indicators Lesson Plan

Rachel A. Scavuzzo, The University of Akron
Space Food and Nutrition

Miranda L. Steinberger, The University of Toledo
Application of Cavitation for Controlled Cleaning

Brittany M. Studmire, Cleveland State University
NASA's Role in Preserving and Protecting Our Environment

John L. Tatarko, Cleveland State University
The Complete Thermodynamics of Benzene Via Molecular Simulation

Brian J. Tomko, Ohio Northern University
Design of an Unmanned Aerial Vehicle Autopilot Using a Model Airplane Flight Simulator

Ryan E. Tomlinson, Case Western Reserve University
Three Dimensional Dynamic Visualization of Bone Remodeling

Ashley M. Verhoff, University of Cincinnati
Optical Tracking and Verification for Autonomous Satellite Research

Thomas V. Vo, The University of Akron
Design and Implementation of an Intelligent Balloon for Real-Time Environment Monitoring

Trudy Wilson-Simmons, Cleveland State University
Teaching Science and Using the Sheltered Instruction Observation Protocol (SIOP) Teaching Strategies

Michael J. Zimcosky, The University of Toledo
Biped Robot Actuated By Shape Memory Alloys