2002 Symposium Presentations

Ngozi S. Ali, Wilberforce University
Simulation and Design of a Binary Calculator With MATLAB

Jeremiah D. Allen, Wright State University
Modal Analysis of Generic Structures

Carrie Leigh Andre, The Ohio State University
III-V Semiconductor Materials on Gaas, Ge and Ge/Sige/Si Substrates for Photovoltaic Applications

John N. Angelis, Youngstown State University
Contrast and Comparison of Industrial Engineering Techniques Applied to Scheduling Problems

Jeffrey B. Armstrong, Case Western Reserve University
The Transient Response of a Low-Stretch Solid-Fuel Diffusion Flame to a Sudden Elimination of Gravity

Susanne Bellante, The University of Toledo
Using Simulation to Optimize Vehicle Damping

Jordan L. Bertram, The University of Toledo
Development of Temperature-Responsive Hydrogels for Use in Nanosensors

Matthew C. Birch, Case Western Reserve University
Second-Generation Hybrid Micro-Robot Inspired by Crickets

Matthew P. Bozzuto, Cedarville University
Investigation of Sound Level Prediction Methods in Hydraulic Power Unit Design

Nicholas V. Caldwell, University of Cincinnati
MATLAB/Simulink Modeling of Tethered Satellite Systems

W. Bryan Callender, University of Cincinnati
An Investigation of Innovative Passive Flow Control Techniques for Noise Attenuation in High By-Pass Ratio Separate Flow Exhaust Systems

Christopher Carlisle, Jr., Central State University
Resin Injection Molding System

Kelly J. Carter, The University of Toledo
The Distribution of Homologous Impurities into Lysozyme Crystals

Robert H. Coridan, The Ohio State University
Monte Carlo Methods in One-Dimensional Many-Body Systems

Catherine M. Corrigan, Case Western Reserve University
Alteration Minerals in the Martian Meteorite ALH84001

Jeremy S. Daily, Wright State University
Plastic Dissipation Energy in Fatigue Crack Growth Under Mixed-Mode Loading

MonCheri Davenport, The University of Akron
Communication System Modeling using SIMULINK

Diane L. Drozd, The Ohio State University
Morphing Using a Recursive Approach to Establishing Three-Dimensional Object Correspondence

Sally C. Eaton, Case Western Reserve University
Co-Doping of CVD Diamond with Boron and Sulfur

Matthew T. Ellis, Ohio Northern University
Study of the Effects of Reduced Gravity on a Heat Sink

Matthew R. Garrett, Cedarville University
Chemotaxic Response of Coelomocytes in Relation to f-MLP, Staphylococcus aureus and Escherichia Coli

Amanda C. Gault, The University of Toledo
Be Stars: Modeling Their Polarization and Infrared Excess

Rachel M. Gligorich, Wright State University
Turbine Disk Assembly Damper Testing System

Katherine M. Grendell, University of Cincinnati
Reduction of Nanosatellite Flight Test Data

DeAnna L. Harris, Central State University
Resin Injection Molding System

Kristen A. Hejduk, The University of Toledo
Understanding Automotive Fuel Usage In the U. S.: A Life-Cycle Assessment

James I. Hileman, The Ohio State University
On Turbulence Structures and Acoustic Radiation in a Mach 1.3 Jet

Ralph Hutchison, The Ohio State University
A New Detector for Neutral Atoms

Gregg H. Jessen, The Ohio State University
LEEN Characterization of Ohmic Contacts and Device Processing on AlGaN/GaN for HEMT Applications

La Juana L. Jordan, Wilberforce University
Five Methods of Evaluating the Transition Matrix

Scott M. Kish, Lakeland Community College
A Study in GIS/GPS

Joel A. Lepak, Youngstown State University
Computer Simulation and Experimental Data Analysis in the Investigation of Triggered Gamma Emission in Hafnium-178

Brette Leah Luck, The Ohio State University
Adaptive Beamforming for a Microphone Array

Jeffrey R. McCutcheon, University of Dayton
Studies in Particle Size Effects on Nephelometric Turbidity Measurements Taken with Optical Probes

Brian J. McMorrow, University of Dayton
Processing and Characterization of Vinyl-Ester-Styrene Copolymer with Variable Concentrations of Carbon Nanofiber

Scott E. Mesarch, The University of Akron
A Study of Torsional Flutter of a Linear Cascade

Aaron M. Oyster, The University of Akron
Debris Clearing Windshield Wiper Device

Shatese J. Penter, Central State University
Resin Molding Transfer

Damon J. Pierce, Wilberforce University
Disposal of Circuit Boards

Erin E. Porter, Miami University
Performance Based Contracting and its Implementation into the ISO Environment of the Aerospace Industry

Tara L. Rasch, Case Western Reserve University
A Study of Non-Deterministic Approaches: Their Applications and Benefits

Michael D. Rayman, The University of Akron
An FPGA-Based 2D Discrete Wavelet Transform Core for Image Compression

David B. Rear, Case Western Reserve University
Aqueous Electrodeposition of Gallium Nitride

John T. Reye, Cleveland State University
Use of Chemical Vapor Deposition Mechanisms for Generating Conversion Coatings

Carrie M. Rhoades, University of Cincinnati
Correlation of Computational Pressure Distribution Over a Bending Wing to Experimental Data

Eric D. Roush, Wright State University
Design of a Multi-Functional Inlet Guide Vane Section for Aeromechanical Compressor Research

Marilyn R. Rucker, Wilberforce University
An Exploration of Wavelet Theory in Image Processing

Erasmo Ruggiero, Cleveland State University
Chemical Vapor Deposition of an Aryl Phosphate onto an Alpha-Alumina Surface

Stephanie M. Runyon, Wright State University
Aerodynamic Design of Inlet Guide Vanes for a Stage Matching Investigation Rig

Patrick A. Sadowski, The University of Toledo
Searching for Periodicity in Selected Be Stars

Kevin M. Schreck, Miami University
Effectiveness of Pulsed Cooling in Injection Molding

Alison J. Sega, Case Western Reserve University
Development of a Microfabricated Creatinine Biosensor

Robin E. Seibel, The University of Akron
Manipulation of Micro Scale Particles in an Optical Trap Using Interferometry

Debra A. Shorf, Cleveland State University
Microgravity Two-Phase Liquid/Vapor Flow Characteristics

Michael G. Shuey, University of Cincinnati
Cartesian Grid Methods for Curved Bodies

Dmitry Shuster, Cleveland State University
The Use of Adsorptive Compression Cycle for Gas Compression in the Future Mission to Mars

Keith I. Spalsbury, Cleveland State University
Diagnostics and Dynamic Control of a Magnetic Bearing System in Support of a Rigid Rotor

Cassandra R. Steffy, Marietta College
Application of a Dimensionless Inflow Performance Relationship in Horizontal Gas Wells

Bradley E. Stockton, Central State University
Resin Injection Molding System

Karin S. Straley, University of Dayton
Multidimensional Gas Chromatography of Aviation Fuels and Related Materials

Jerry Jean Tardivo, Marietta University
The Use of Reservoir Simulation to Determine the Applicability of Waterflooding in the Appalachian Basin

Brendan R. Thompson, Ohio Northern University
Study of the Effects of Reduced Gravity on a Heat Sink

Russell W. Valentine, Case Western Reserve University
Measurement of Bone Strain and Bone-marrow Pressure in Cancellous Bone

Amy J. Wagner, University of Dayton
Development and Verification of a Simple Model to Predict Resin Gel Time as a Function of Temperature and Initiator Concentration

Paul H. Young, The University of Toledo
Analysis and Modeling of Solvent Migration in Paraffin Deposition